Brand: Eastwood
Model: 13336
The Trim Anvil with Stand (13336) is contoured to suit many trim forming needs. Includes conical and pyramid tapered horns and square flat center. Measures 5-1/4" long by 1" wide by 2-7/8" tall, weighs 8 ounces...
AU$52.00
Brand: Eastwood
Model: 52033
One pack of 100 Hog RingsMeasurements for open ring shown in photo are 23 mm width x 11.8 mm high, wire diameter is 2 mmMade in the USA..
AU$17.32
Brand: Eastwood
Model: 20411
The Eastwood Versa-Bend Forming Brake is designed to be used with the Eastwood #14042 Versa-Bend 20" Sheet Metal Brake to create multiple bend channel shapes as narrow as 3/8" (9.5mm).Works with 20 gauge steel and 18 gauge aluminumUse on panels up to 20" wideExcellent for creating hard to form parts..
AU$162.00
Brand: Eastwood
Model: 19016
4-pc. Intergrip Welding Clamp Set easily aligns and grips panels for precise butt welds
Miniature butt-weld clamps align panels edge-to-edge and surface-to-surface with the appropriate 0.040" gap that helps you produce clean welds with minimal grinding.
Set of 4 clamps
A must for l..
AU$29.00
More stock late January 2023
Brand: Eastwood
Model: 20124
1/8 inch x 1/4 inch long gold anodized aluminum countersunk rivets. Used where you do not want a protruded head. Must be driven with #20125 flush rivet setter..
AU$44.34
Brand: Eastwood
Model: 20126
1/8 inch x 5/16 inch 470 style aluminum rivet. (3.175mm x 8mm with 6.5mm Head)
1/8 inch x 5/16 inch 470 style gold anodized aluminum rivet. Made for 1000 series aluminum for aluminum or steel panels. MS20470 4 3 or AN470 4 3 industry part numbers..
AU$50.00
More Stock Soon.
Brand: Eastwood
Model: 32044
WHY BUY THIS EASTWOOD BEAD ROLLER TOOL?Add strength and rigidity to metal panelsMake replacement floor pans, firewalls, trunk floors and moreCreate channels, flanges and a multitude of profilesFabricate decorative custom designsEASTWOOD BEAD ROLLER FEATURESHandles up to a 38" wide work piece4 mandre..
AU$330.00
Sale
Brand: Eastwood
Model: 20356
Punch and Bead a 1.5 inch hole without a press. All that is needed to create a hole and flare is a 1/2 inch pilot hole and a 3/4 inch wrench . An easy process that can be done on a vehicle, on the work bench or on the job site.Handles up to 16 gauge (1.6mm) mild steel, 19 gauge (1mm) stainless..
AU$199.00 AU$250.00
Brand: Eastwood
Model: 31043
Use Eastwood Tinning Butter for tinning sheet metal prior to applying body solder Tinning butter prepares the bare metal surface so that body solder has a good base to adhere to.Easy to apply right from the jarJust brush on and heat the metalNo mixing required1-lb. jarMade in the USAThis tinnin..
AU$78.50
More Stock Soon
Brand: Eastwood
Model: 10198B
These bottles and lids offer convenient storage for powder. The cups will thread directly onto the HotCoat Powder Gun. These are the same cups and lids that all of our 8 oz size powders are packaged in...
AU$17.35
Brand: Eastwood
Model: 20140
1/8 inch x 3/16 inch 470 style aluminum rivet. (3.175mm x 4.76mm with 6.5mm Head)
Made for 1000 series aluminum for aluminum or steel panels. MS20470 4 3 or AN470 4 3 industry part numbers.
1/4lb, approximately 430 pieces...
AU$36.20
More Stock Soon.
Brand: Eastwood
Model: 20141
3/16 inch x 5/16 inch 470 style gold anodized aluminum rivet. (4.76mm x 7.93mm)
Made for 1000 series aluminum for aluminum or steel panels.
MS20470 4 3 or AN470 4 3 industry part numbers.
1/4lb, approximately 125 pieces...
AU$36.20