-120x120.jpg)
-250x250.jpg "Eastwood Punch and Flare Dies 1 inch")
Brand: Eastwood
Model: 20530
Punch and flare a 1 inch hole without a press. All that is needed to create a hole and flare is a 1/2 inch pilot hole and a 3/4 inch wrench . An easy process that can be done on a vehicle, on the work bench or on the job site. Handles up to 16 gauge (1.6mm) mild steel, 19 gauge (1mm) stainless..
AU$152.95
Sale
Brand: Eastwood
Model: 20355
Punch and flare a 1.5 inch hole without a press. All that is needed to create a hole and flare is a 1/2 inch pilot hole and a 3/4 inch wrench . An easy process that can be done on a vehicle, on the work bench or on the job site.Handles up to 16 gauge (1.6mm) mild steel, 19 gauge (1mm) stainles..
AU$129.00 AU$152.95
Sale
Brand: Eastwood
Model: 20531
Punch and flare a 2 inch hole without a press. All that is needed to create a hole and flare is a 1/2 inch pilot hole and a 3/4 inch wrench . An easy process that can be done on a vehicle, on the work bench or on the job site.Handles up to 16 gauge (1.6mm) mild steel, 19 gauge (1mm) stainless ..
AU$152.00 AU$173.00
Sale
Brand: Eastwood
Model: 20356
Punch and Bead a 1.5 inch hole without a press. All that is needed to create a hole and flare is a 1/2 inch pilot hole and a 3/4 inch wrench . An easy process that can be done on a vehicle, on the work bench or on the job site.Handles up to 16 gauge (1.6mm) mild steel, 19 gauge (1mm) stainless..
AU$199.00 AU$250.00
Brand: Eastwood
Model: 21316
Create a flare in sheet metal up to 1/8" (3.175mm) thick using the Eastwood Dimple Dies.Includes both Male and Female DiesForm clean 45° flares in up to 1/8” thick steelMade with high-strength Chrome Moly steelMachined to close tolerancesSimply drill the recommended hole size in the metal that you d..
AU$460.00
More Stock Soon
Brand: Eastwood
Model: 21310
Create 1/2" flares in sheet metal up to 1/8" thick using the Eastwood Dimple Dies.Includes both Male and Female DiesForm clean 45° flares in up to 1/8” (3mm) thick steelMade with high-strength Chrome Moly steelMachined to close tolerancesSimply drill the recommended hole size in the metal that you d..
AU$58.00
Brand: Eastwood
Model: 21311
Create 1" flares in sheet metal up to 1/8" thick using the Eastwood Dimple Dies.Includes both Male and Female DiesForm clean 45° flares in up to 1/8” (3mm) thick steelMade with high-strength Chrome Moly steelMachined to close tolerancesSimply drill the recommended hole size in the metal that you des..
AU$90.78
Brand: Eastwood
Model: 21312
Create 1 1/2" flares in sheet metal up to 1/8" thick using the Eastwood Dimple Dies.Includes both Male and Female DiesForm clean 45° flares in up to 1/8” (3.175 mm) thick steelMade with high-strength Chrome Moly steelMachined to close tolerancesSimply drill the recommended hole size in the metal tha..
AU$116.00
Brand: Eastwood
Model: 21314
Create 2" flares in sheet metal up to 1/8" thick using the Eastwood Dimple Dies.Includes both Male and Female DiesForm clean 45° flares in up to 1/8” (3.175 mm) thick steelMade with high-strength Chrome Moly steelMachined to close tolerancesSimply drill the recommended hole size in the metal that yo..
AU$115.10
More Stock Soon
Brand: Eastwood
Model: 21315
Create 2 1/2" flares in sheet metal up to 1/8" thick using the Eastwood Dimple Dies.Includes both Male and Female DiesForm clean 45° flares in up to 1/8” (3.175 mm) thick steelMade with high-strength Chrome Moly steelMachined to close tolerancesSimply drill the recommended hole size in the metal tha..
AU$134.76
Showing 1 to 10 of 10 (1 Pages)